Eden Campus - Equipment for AMCF at Eden Campus

38400000

Instruments for checking physical characteristics

31711140

Electrodes

43410000

Mineral-processing machinery

31400000

Accumulators, primary cells and primary batteries

31682300

Medium-voltage equipment

We require a roll-to-roll coating system, capable of producing single or double-sided coated foil electrodes with a high degree of control. The primary purposes of this instrument are: - Electrode coating for lithium and sodium-ion battery anodes and cathodes Required components: - Roll-to-roll coating system. - Drying oven of at least 3 m length. - Coating...

Delivery: UKM72

Slurry Processing Equipment We wish to acquire several pieces of equipment required for the processing of battery electrodes. Required components: - Mixers - Calender - Vacuum Ovens A small and large volume mixer would be desirable, where one mixer should handle up to 1 L of slurry, and another up to 20 L of slurry. These should both be capable of 3-in-1 ope...

Delivery: UKM72

Pouch Cell Production Ideally, a semi-autonomous system is requested, however costings for a manual setup (i.e. manual pouch forming, filling, sealing etc.) will also be considered. The design of these cells will use an opposite-ended tab design, rather than the traditional single-ended tab design. We anticipate constructing cells in a semi-autonomous fashio...

Delivery: UKM72

Battery Cycling and Formation We desire an instrument capable of forming and ageing lithium and sodium-ion batteries. Cells will be in the range 0.1 to 15 Ah. The instrument should have at least 60 channels, which are capable of formation cycling, rate studies, and cycle life ageing. The ability to perform hybrid-pulse power would be an advantage. A current...

Delivery: UKM72